050 967 5980
Pentagram
Computer Controlled Three Dimensions (31) Physics
COMPUTER CONTROLLED COMBUSTION LABORATORY UNIT - TVCC
  • TVCC
Available
9.1.- FUNDAMENTALS AND BASIC CONCEPTS OF THERMODYNAMICS
TVCC
Computer Controlled Combustion Laboratory Unit
The Computer Controlled Combustion Laboratory Unit, "TVCC", unit is mounted on a metallic frame that enables safe access to the equipment and an easy handling and access to the burner, combustion chamber and all the accessories and control panels....
View Unit
THERMAL EXPANSION TRAINING UNIT - TEDT
  • TEDT
Available
9.5.- THERMAL HYDRAULIC PIPING SYSTEM
TEDT
Thermal Expansion Training Unit
The Thermal Expansion Training Unit, "TEDT", allows to study the thermal expansion of different pipe sections and the thermal expansion force. It comprises original components as used in heating and sanitation systems. This unit provides...
View Unit
COMPUTER CONTROLLED EXPANSION PROCESSES OF A PERFECT GAS UNIT - TEPGC
  • TEPGC
Available
9.1.- FUNDAMENTALS AND BASIC CONCEPTS OF THERMODYNAMICS
TEPGC
Computer Controlled Expansion Processes of a Perfect Gas Unit
The "TEPGC" is a unit designed to demonstrate the expansion and compression processes of a perfect gas and the basic principles of thermodynamics. The unit consists of two rigid vessels connected to each other. They are made of methacrylate to...
View Unit
BOMB CALORIMETER - TBCF
  • TBCF
Available
9.1.- FUNDAMENTALS AND BASIC CONCEPTS OF THERMODYNAMICS
TBCF
Bomb Calorimeter
Bomb Calorimeter, "TBCF", comprises the calorimeter, a calorimeter vessel, an outer double walled water jacket, control unit to switch on/off the stirrer and the ignition device, an accurate thermometer and charging unit with pressure gauges to...
View Unit
COMPUTER CONTROLLED SEPARATING AND THROTTLING CALORIMETER - TCESC
  • TCESC
Available
9.1.- FUNDAMENTALS AND BASIC CONCEPTS OF THERMODYNAMICS
TCESC
Computer Controlled Separating and Throttling Calorimeter
The Computer Controlled Separating and Throttling Calorimeter, "TCESC", has been designed to determine the steam humidity content and the dryness fraction of steam.This unit works with steam. The steam is introduced into the line by means of a...
View Unit
COMPUTER CONTROLLED MARCET BOILER UNIT - TECMC
  • TECMC
Available
9.1.- FUNDAMENTALS AND BASIC CONCEPTS OF THERMODYNAMICS
TECMC
Computer Controlled Marcet Boiler Unit
The Computer Controlled Marcet Boiler Unit "TECMC" is an unit designed to demonstrate the relationship between pressure and temperature of the saturated steam for comparison with published results.The unit consists of an insulated stainless steel...
View Unit
COMPUTER CONTROLLED TEMPERATURE MEASUREMENT UNIT - TMTC
  • TMTC
Available
9.1.- FUNDAMENTALS AND BASIC CONCEPTS OF THERMODYNAMICS
TMTC
Computer Controlled Temperature Measurement Unit
The Computer Controlled Temperature Measurement Unit, "TMTC", works as a temperature meter that uses different temperatures measuring devices to compare, check and analyze the temperature and how is the precision for the measure and for the device...
View Unit
TEMPERATURE MEASUREMENT UNIT - TMT
  • TMT
Available
9.1.- FUNDAMENTALS AND BASIC CONCEPTS OF THERMODYNAMICS
TMT
Temperature Measurement Unit
The Temperature Measurement Unit, "TMT", works as a temperature meter that uses different temperatures measuring devices to compare, check and analyze the temperature and how is the precision for the measure and for the device that the student has...
View Unit
TEMPERATURE MEASUREMENT TRAINING UNIT - TEMT
  • TEMT
Available
9.10.3.- INSTALLATIONS AND MAINTENANCE TRAINING
TEMT
Temperature Measurement Training Unit
The Temperature Measurement Training Unit, "TEMT", allows to compare the response of several devices to measure the temperature for different flows and different installation position of these devices.The unit includes four different measuring...
View Unit
COMPUTER CONTROLLED GAS LAWS UNIT (BOYLE AND GAY-LUSSAC LAWS) - TLBGC
  • TLBGC
Available
9.1.- FUNDAMENTALS AND BASIC CONCEPTS OF THERMODYNAMICS
TLBGC
Computer Controlled Gas Laws Unit (Boyle and Gay-Lussac Laws)
The Computer Controlled Gas Laws Unit (Boyle and Gay-Lussac Law), "TLBGC", allows to demonstrate two fundamental gas laws: Boylend Mariotte's Law (isothermal change of state) and Gay-Lussac's 2 Law (isochoric change of state).The unit consists of...
View Unit
COMPUTER CONTROLLED RECYCLE LOOPS UNIT - TRLC
  • TRLC
Available
9.1.- FUNDAMENTALS AND BASIC CONCEPTS OF THERMODYNAMICS
TRLC
Computer Controlled Recycle Loops Unit
The Computer Controlled Recycle Loops Unit, "TRLC", has been designed to demonstrate, both visually and experimentally, what a recycleloop is and how it works. It has many teaching applications, among them the performance of mass and energy...
View Unit
RECYCLE LOOPS UNIT - TRLB
  • TRLB
Available
9.1.- FUNDAMENTALS AND BASIC CONCEPTS OF THERMODYNAMICS
TRLB
Recycle Loops Unit
The Recycle Loops Unit, "TRLB", has been designed to demonstrate, both visually and experimentally, what a recycle loop is and how itworks. It has many teaching applications, among them the performance of mass and energy balances under stable and...
View Unit
COMPUTER CONTROLLED SATURATION PRESSURE UNIT - TSPC
  • TSPC
Available
9.1.- FUNDAMENTALS AND BASIC CONCEPTS OF THERMODYNAMICS
TSPC
Computer Controlled Saturation Pressure Unit
The Computer Controlled Saturation Pressure Unit, "TSPC", consists of a water boiler, including a computer controlled immersion heating element, and a sight glass to observe the boiling patterns in the water surface and control the water level...
View Unit
AIR HUMIDITY MEASUREMENT UNIT - TMHA
  • TMHA
Available
9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER
TMHA
Air Humidity Measurement Unit
The Air Humidity Measurement Unit, "TMHA", enables the differences in accuracy between different instruments to measure the air relative humidity. It also includes a fan to show the effects of airflow on the different instruments. A mobile...
View Unit
COMPUTER CONTROLLED FLAME PROPAGATION AND STABILITY UNIT - TVPLC
  • TVPLC
Available
9.1.- FUNDAMENTALS AND BASIC CONCEPTS OF THERMODYNAMICS
TVPLC
Computer Controlled Flame Propagation and Stability Unit
The Computer Controlled Flame Propagation and Stability Unit, "TVPLC", is a teaching unit which allows to obtain various flames by changing the quantities of the fuel – comburent mix. The unit is prepared to work with different gaseous fuels, so...
View Unit
COMPUTER CONTROLLED FLOW OF COMPRESSIBLE FLUIDS UNIT - HFCC
  • HFCC
Available
8.7.5.- COMPRESSORS
HFCC
Computer Controlled Flow of Compressible Fluids Unit
The Computer Controlled Flow of Compressible Fluids Unit, "HFCC", allows to study the variation of pressure and density, the speeds of the fluid, the different fluctuations that the fluid presents when fluids across different sections in a pipe,...
View Unit
COMPUTER CONTROLLED NOZZLE PERFORMANCE TEST UNIT - TFTC
  • TFTC
Available
9.1.- FUNDAMENTALS AND BASIC CONCEPTS OF THERMODYNAMICS
TFTC
Computer Controlled Nozzle Performance Test Unit
The Computer Controlled Nozzle Performance Test Unit, "TFTC", has been specially designed to allow students to investigate and study the performance of a nozzle (kinetic energy and thrust). Operating from a normal laboratory compressed air...
View Unit
NOZZLE PRESSURE DISTRIBUTION UNIT - TPT
  • TPT
Available
9.1.- FUNDAMENTALS AND BASIC CONCEPTS OF THERMODYNAMICS
TPT
Nozzle Pressure Distribution Unit
The Nozzle Pressure Distribution Unit, "TPT", allows to investigate the pressure distribution and the mass flow rate in nozzles (convergentdivergent and convergent nozzles).The unit includes three types of nozzles:Convergent type (conical) nozzle,...
View Unit
COMPUTER CONTROLLED HOT WATER PRODUCTION AND HEATING TEACHING UNIT - EACC
  • EACC
Available
9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER
EACC
Computer Controlled Hot Water Production and Heating Teaching Unit
The main element of the Computer Controlled Hot Water Production and Heating Teaching Unit, "EACC", is the boiler. Its function is the heating of the water that will flow through the other elements transferring its heat. It is a low temperature...
View Unit
COMPUTER CONTROLLED BIOMASS PROCESS UNIT - EBMC
  • EBMC
Available
5.3.7.- BIOFUELS
EBMC
Computer Controlled Biomass Process Unit
The main element of the unit is the biomass boiler, which will heat the water that will flow through the other components transferring its heat.The boiler is a biomass boiler of 16 kW that works with pellet and other granulated fuels. The body of...
View Unit
BIOMASS PROCESS UNIT - EBMB
  • EBMB
Available
5.3.7.- BIOFUELS
EBMB
Biomass Process Unit
The main element of the unit is the biomass boiler, which will heat the water that will flow through the other components transferring its heat.The boiler is a biomass boiler of 16 kW that works with pellet and other granulated fuels. The body of...
View Unit
COMPUTER CONTROLLED UNIT TO STUDY THE EFFICIENCY OF A HEATING SYSTEM - TEHSC
  • TEHSC
Available
9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER
TEHSC
Computer Controlled Unit to Study the Efficiency of a Heating System
The Computer Controlled Unit to Study the Efficiency of a Heating System, "TEHSC",designed by EDIBON allows for studying and analyzing a closed heating system made upof pipes with different diameter and fittings normally used in real heating...
View Unit
WATER HEATERS TRAINING UNIT - WHT
  • WHT
Available
9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER
WHT
Water Heaters Training Unit
The Water Heater Training Unit, "WHT", allows demonstrating the operation of three types of water heaters. The unit has three heaters, two of them commercial one with electronic ignition and one in millivolt, and a residential gas heater without...
View Unit
COMPUTER CONTROLLED AIR CONDITIONING LABORATORY UNIT - TAAC
  • TAAC
Available
9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER
TAAC
Computer Controlled Air Conditioning Laboratory Unit
The Computer Controlled Air Conditioning Laboratory Unit, "TAAC", has been designed to study the change of the air conditions and the refrigeration circuit.The unit consists of a testing tunnel made of stainless steel, in which there have...
View Unit
AIR CONDITIONING LABORATORY UNIT - TAAB
  • TAAB
Available
9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER
TAAB
Air Conditioning Laboratory Unit
The Air Conditioning Laboratory Unit, "TAAB", has been designed to study the change of the air conditions and the refrigeration circuit. The unit consists of a testing tunnel made in stainless steel, in which there have installed two windows....
View Unit
COMPUTER CONTROLLED RECIRCULATING AIR CONDITIONING UNIT - TARC
  • TARC
Available
9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER
TARC
Computer Controlled Recirculating Air Conditioning Unit
The Computer Controlled Recirculating Air Conditioning Unit, "TARC", has been designed to study both the changes in the air conditions and the refrigeration circuit. For that purpose, temperature sensors, pressure sensors and flow meters have been...
View Unit
RECIRCULATING AIR CONDITIONING UNIT - TARB
  • TARB
Available
9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER
TARB
Recirculating Air Conditioning Unit
The Recirculating Air Conditioning Unit, "TARB", has been designed to study both the changes in the air conditions and the refrigeration circuit. For that purpose, temperature sensors, pressure meters and flow meters have been strategically...
View Unit
COMPUTER CONTROLLED AUTOMOBILE AIR CONDITIONING UNIT - TAAUC
  • TAAUC
Available
9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER
TAAUC
Computer Controlled Automobile Air Conditioning Unit
The Computer Controlled Automobile Air Conditioning Trainer, "TAAUC", consists, basically, of a compressor driven through a belt by a motor that simulates the engine of a car.The number of revolutions of the engine and, therefore, the compressor,...
View Unit
AUTOMOBILE AIR CONDITIONING UNIT - TAAU
  • TAAU
Available
9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER
TAAU
Automobile Air Conditioning Unit
The Automobile Air Conditioning Unit, "TAAU", consists, basically, of a compressor driven through a belt by a motor that simulates the engine of a car. The number of revolutions of the engine and, therefore, the compressor, can be adjusted with a...
View Unit
COMPUTER CONTROLLED AIR CONDITIONING UNIT WITH CLIMATIC CHAMBER - TSAC
  • TSAC
Available
9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER
TSAC
Computer Controlled Air Conditioning Unit with Climatic Chamber
The Computer Controlled Air Conditioning Unit with Climatic Chamber, "TSAC", designed by EDIBON, is clearly arranged and represents a complete air conditioning system with an air duct and a climatic chamber.The main components of the air...
View Unit
COMPUTER CONTROLLED AIR DUCT SYSTEMS UNIT - TSCAC
  • TSCAC
Available
9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER
TSCAC
Computer Controlled Air Duct Systems Unit
With the Computer Controlled Air Duct Systems Unit, "TSCAC", the user will study the air distribution under different configurations thanks to the supports included with the unit. The user himself will assemble the air ducts using usual elements...
View Unit
SPLIT AIR CONDITIONER UNIT - TACS
  • TACS
Available
9.2.- HEATING, VENTILATION, AIR CONDITIONING AND HOT WATER
TACS
Split Air Conditioner Unit
The Split Air Conditioner Unit, "TACS", designed by EDIBON allows the study of the operation of a split system air conditioner with heat pump function to heat or cool, apart from other operation modes available.The main element of the Split Air...
View Unit
HYDRAULIC RADIATOR BALANCING TRAINING UNIT - THBT
  • THBT
Available
9.10.3.- INSTALLATIONS AND MAINTENANCE TRAINING
THBT
Hydraulic Radiator Balancing Training Unit
The Hydraulic Radiator Balancing Training Unit, "THBT", allows the study of the amount of water with which to guarantee that all the radiators of an installation are supplied with sufficient hot water.The hydraulic balancing is carried out by...
View Unit
RADIATORS TRAINING UNIT - RT
  • RT
Available
9.10.3.- INSTALLATIONS AND MAINTENANCE TRAINING
RT
Radiators Training Unit
The Radiators Training Unit, "RT", has been designed to study hot water heating systems. These systems are called that way because they use water as working fluid between the generation system, usually a boiler, and the emitters, such as...
View Unit
HEATING SYSTEM TRAINING UNIT - THST
  • THST
Available
9.10.3.- INSTALLATIONS AND MAINTENANCE TRAINING
THST
Heating System Training Unit
The Heating System Training Unit, "THST", has been designed to study central heating systems. The unit simulates a central heating system. For that purpose, it is made up of four radiators with a thermostatic valve each. This valve controls the...
View Unit
CIRCULATING PUMPS TRAINING UNIT - TCPT
  • TCPT
Available
9.10.3.- INSTALLATIONS AND MAINTENANCE TRAINING
TCPT
Circulating Pumps Training Unit
The Circulation Pumps Training Unit, "TCPT", is a unit of experimentation of sanitary and heating techniques that allows studying the operation of circulating pumps, both connected in series and in parallel. It consists of a pipe circuit with two...
View Unit
EXPANSION VESSEL TRAINING UNIT - TEVT
  • TEVT
Available
9.10.3.- INSTALLATIONS AND MAINTENANCE TRAINING
TEVT
Expansion Vessel Training Unit
The Expansion Vessel Training Unit, "TEVT", is a test unit for sanitary and heating techniques that allows studying the operation of an expansion vessel. It also allows studying the pressure – volume characteristic curve of it. The aim element of...
View Unit
PRESSURE VESSEL AND SAFETY FEATURES TRAINING UNIT - TPVST
  • TPVST
Available
9.10.3.- INSTALLATIONS AND MAINTENANCE TRAINING
TPVST
Pressure Vessel and Safety Features Training Unit
The Pressure Vessel and Safety Features Training Unit, "TPVST", is an experimentation of sanitary and heating techniques unit that allows studying the safety elements of a heating system with a pressure tank. It consists of a circuit of pipes for...
View Unit
HEAT PUMP FOR DIFFERENT HEAT SOURCES AND HEAT EXCHANGERS - HPSE
  • HPSE
Available
9.3.- HEAT PUMPS
HPSE
Heat Pump for different Heat Sources and Heat Exchangers
The Heat Pump for different Heat Sources and Heat Exchangers, "HPSE", represents the typical compressor compression refrigeration plant. The compressor is of the scroll type, which is a positive displacement compressor.The evaporator and condenser...
View Unit
UNDERFLOOR HEATING AND/OR HEAT SOURCE FOR HEAT PUMP - UHHS
  • UHHS
Available
9.3.- HEAT PUMPS
UHHS
Underfloor Heating and/or Heat Source for Heat Pump
The Underfloor Heating and/or Heat Source for Heat Pump, "UHHS", designed by EDIBON, allows the visualization of a piping system that simulates a radiant floor heating system and its functions as a heat sink. It can also be used as a heat source...
View Unit
FAN HEATER AND/OR AIR HEAT EXCHANGER - FHAH
  • FHAH
Available
9.3.- HEAT PUMPS
FHAH
Fan Heater and/or Air Heat Exchanger
The unit Fan Heater and/or Air Heat Exchanger, "FHAH", designed by EDIBON, allows the visualization of a fan heater and its functions as a heat sink. It can also be used as a heat source working in conjunction with a heat pump.The main component...
View Unit
COMPUTER CONTROLLED BENCH TOP COOLING TOWER - TTEC
  • TTEC
Available
11.1.7.- DRYING AND COOLING
TTEC
Computer Controlled Bench Top Cooling Tower
The Computer Controlled Bench Top Cooling Tower, "TTEC", includes a pump that impels hot water from a tank (with level switch and heating element) to the manifolds located at the top of the cooling tower. Water flow can be adjusted by a manual...
View Unit
BENCH TOP COOLING TOWER - TTEB
  • TTEB
Available
11.1.7.- DRYING AND COOLING
TTEB
Bench Top Cooling Tower
The Bench Top Cooling Tower, "TTEB", includes a pump that impels hot water from the tank (with level switch and heating element) to the manifolds located at the top of the cooling tower. Water flow can be adjusted by a manual needle valve.A...
View Unit
COMPUTER CONTROLLED REFRIGERATION CYCLE DEMONSTRATION UNIT - TCRC
  • TCRC
Available
9.4.- REFRIGERATION
TCRC
Computer Controlled Refrigeration Cycle Demonstration Unit
The Computer Controlled Refrigeration Cycle Demonstration Unit, "TCRC", allows the demonstration of vapour compression refrigeration and heat pump cycle with visual observation of all important processes.Thanks by utilising a non-toxic refrigerant...
View Unit
REFRIGERATION CYCLE DEMONSTRATION UNIT - TCRB
  • TCRB
Available
9.4.- REFRIGERATION
TCRB
Refrigeration Cycle Demonstration Unit
The vapour compression refrigeration and heat pump cycle is very important in food and drug preservation, air conditioning and heat pumps, as well as other industrial and commercial process.The Refrigeration Cycle Demonstration Unit, "TCRB",...
View Unit
COMPUTER CONTROLLED ABSORPTION REFRIGERATION UNIT - TRAC
  • TRAC
Available
9.4.- REFRIGERATION
TRAC
Computer Controlled Absorption Refrigeration Unit
The Computer Controlled Absorption Refrigeration Unit, "TRAC", designed by EDIBON, is a complete laboratory unit for the demonstration of absorption refrigeration.This unit is provided with a dual power source (heat source) of LPG and electricity....
View Unit
ABSORPTION REFRIGERATION UNIT - TRAB
  • TRAB
Available
9.4.- REFRIGERATION
TRAB
Absorption Refrigeration Unit
The Absorption Refrigeration Unit, "TRAB", developed by EDIBON, is a complete laboratory unit for the demonstration of absorption refrigeration.This unit is provided with a dual power source (heat source) of LPG and electricity. A pressure...
View Unit
COMPUTER CONTROLLED VORTEX TUBE REFRIGERATOR UNIT - TPVC
  • TPVC
Available
9.4.- REFRIGERATION
TPVC
Computer Controlled Vortex Tube Refrigerator Unit
The Computer Controlled Vortex Tube Refrigerator Unit, "TPVC", is a unit designed to study the physical, mechanical and thermodynamic characteristics of a vortex tube.This unit works with compressed air. The air, previously filtered to remove...
View Unit
COMPUTER CONTROLLED THERMO-ELECTRIC HEAT PUMP - TBTC
  • TBTC
Available
5.3.11.- OTHER NON-CONVENTIONAL SYSTEMS
TBTC
Computer Controlled Thermo-Electric Heat Pump
The Computer Controlled Thermo-Electric Heat Pump, "TBTC", allows the study of different phenomena in which heat and electricity take place (Thermoelectricity).Some of them are the Peltier effect, the Thomson or Lenz effect and the Seebeck effect....
View Unit
SIMPLE COMPRESSION REFRIGERATION CIRCUIT UNIT - TSCR
  • TSCR
Available
9.4.- REFRIGERATION
TSCR
Simple Compression Refrigeration Circuit Unit
The Simple Compression Refrigeration Circuit Unit "TSCR" represents the typical compression refrigeration system with compressor.The evaporator and the condenser have been designed as a copper pipe coil immersed in a water-filled tank, which...
View Unit
COMPUTER CONTROLLED VAPOUR-COMPRESSION REFRIGERATION UNIT - TRCVC
  • TRCVC
Available
9.4.- REFRIGERATION
TRCVC
Computer Controlled Vapour-Compression Refrigeration Unit
The Computer Controlled Vapour-Compression Refrigeration Unit, "TRCVC", allows the understanding of the vapor-compression refrigeration process by changing the operation of the different parts of the process, and to study the response of the...
View Unit
COMPUTER CONTROLLED CAPACITY CONTROL METHODS IN REFRIGERATION - THARA2C/1
  • THARA2C/1
Available
9.4.- REFRIGERATION
THARA2C/1
Computer Controlled Capacity Control Methods in Refrigeration
The Computer Controlled Capacity Control Methods in Refrigeration, "THARA2C/1", allows to study and to investigate several methods of capacity control. For this purpose a refrigeration circuit with two refrigeration chambers is available in which...
View Unit
COMPUTER CONTROLLED TWO DOORS DOMESTIC REFRIGERATION UNIT - TRD2PC
  • TRD2PC
Available
9.4.- REFRIGERATION
TRD2PC
Computer Controlled Two Doors Domestic Refrigeration Unit
The main element of the Computer Controlled Two Doors Domestic Refrigeration Unit, "TRD2PC", is a combifridge freezer with transparent panels to observe all the elements of a refrigeration cycle: compressor, filter,evaporator, condenser,...
View Unit
COMPUTER CONTROLLED CONTACT PLATE FREEZER - TPCC
  • TPCC
Available
12.1.- FOOD TECHNOLOGY
TPCC
Computer Controlled Contact Plate Freezer
The Computer Controlled Contact Plate Freezer, "TPCC", allow the student to freeze food products quickly by using an industrial freezing process. The unit includes a compression refrigeration circuit. It is based on mechanically forcing the...
View Unit
REFRIGERATION UNIT WITH DIFFERENT CAPILLARY TUBES - TCRCT
  • TCRCT
Available
9.4.- REFRIGERATION
TCRCT
Refrigeration Unit with Different Capillary Tubes
The Refrigeration Unit with Different Capillary Tubes, "TCRCT", designed by EDIBON, is clearly arranged and represents a typical compression refrigeration system with compressor.The main components of the unit are the hermetic compressor,...
View Unit
VORTEX TUBE REFRIGERATOR UNIT - TPVB
  • TPVB
Available
9.4.- REFRIGERATION
TPVB
Vortex Tube Refrigerator Unit
The Vortex Tube Refrigerator Unit, "TPVB", is a unit designed to study the physical, mechanical and thermodynamic characteristics of a vortex tube. This unit works with compressed air. The air, previously filtered to remove impurities, passes...
View Unit
SANITARY FITTINGS TRAINING UNIT - TEIS
  • TEIS
Available
9.10.3.- INSTALLATIONS AND MAINTENANCE TRAINING
TEIS
Sanitary Fittings Training Unit
The Sanitary Fittings Training Unit, "TEIS", has been designed by EDIBON for training in the plumbing sector. It consists of an anodized aluminum frame and panels in painted steel in which tests can be carried out with the most common systems of...
View Unit
DRINKING WATER INSTALLATION UNIT - TIAP
  • TIAP
Available
9.10.3.- INSTALLATIONS AND MAINTENANCE TRAINING
TIAP
Drinking Water Installation Unit
The Drinking Water Installation Unit, "TIAP", has been designed to demonstrate domestic water heating from the cold water supply. A typical domestic drinking water system is attached to the front panel of the unit. The unit includes the most...
View Unit
PROTECTION OF DRINKING WATER TRAINING UNIT - TPAP
  • TPAP
Available
9.10.3.- INSTALLATIONS AND MAINTENANCE TRAINING
TPAP
Protection of Drinking Water Training Unit
The Protection of Drinking Water Training Unit, "TPAP", has been designed by EDIBON to study cases in which the drinking water system is contaminated with wastewater. It is specially designed for the training of students in the plumbing sector.The...
View Unit
PIPE CLEANING TRAINING UNIT - TELT
  • TELT
Available
9.10.3.- INSTALLATIONS AND MAINTENANCE TRAINING
TELT
Pipe Cleaning Training Unit
The Pipe Cleaning Training Unit, "TELT", designed by EDIBON, simulates a real house piping system, so original components used in plumbing systems are employed.The objective of this unit is to study the cleaning of pipes from the sanitation...
View Unit
SEWERAGE UNIT - TSID
  • TSID
Available
9.10.3.- INSTALLATIONS AND MAINTENANCE TRAINING
TSID
Sewerage Unit
With the Sewerage Unit, "TSID", tests about a wastewater sanitation system can be made and the flow in a sewage system can be observed.A complete sewage system can be observed with the "TSID" unit. The collection of wastewater from a series of...
View Unit
COMPUTER CONTROLLED HEAT TRANSFER SERIES - TSTCC
  • TSTCC
Available
9.6.- HEAT TRANSFER
TSTCC
Computer Controlled Heat Transfer Series
The Computer Controlled Heat Transfer Series, "TSTCC", has been designed by EDIBON to study and compare different types of heat transfer on a small scale. It allows a wide range of heat transfer demonstrations and study the factors affecting and...
View Unit
LINEAR HEAT CONDUCTION MODULE FOR TSTCC - TXC/CL
Available
9.6.- HEAT TRANSFER
TXC/CL
Linear Heat Conduction Module for TSTCC
Accessory of TSTCC
TXC/CL. Linear Heat Conduction Module for TSTCC: study of the principles of linear heat conduction and to allow the measurement of the conductivity of different solid conductors and insulators.Bench-top unit to study the principles of linear heat...
View Unit
RADIAL HEAT CONDUCTION MODULE FOR TSTCC - TXC/CR
Available
9.6.- HEAT TRANSFER
TXC/CR
Radial Heat Conduction Module for TSTCC
Accessory of TSTCC
TXC/CR. Radial Heat Conduction Module for TSTCC: study of the principles of radial heat conduction and to allow the measurement of conductivity on a solid brass disc.Bench-top unit to study the principles of radial heat conduction, and to allow...
View Unit
RADIATION HEAT TRANSFER MODULE FOR TSTCC - TXC/RC
Available
9.6.- HEAT TRANSFER
TXC/RC
Radiation Heat Transfer Module for TSTCC
Accessory of TSTCC
TXC/RC. Radiation Heat Transfer Module for TSTCC: study of the principles of heat transfer and exchange by radiation.Bench-top unit designed to demonstrate the laws of radiant heat transfer and radiant heat exchange.It basically consists of two...
View Unit
EXTENDED SURFACE HEAT TRANSFER MODULE FOR TSTCC - TXC/SE
Available
9.6.- HEAT TRANSFER
TXC/SE
Extended Surface Heat Transfer Module for TSTCC
Accessory of TSTCC
TXC/SE. Extended Surface Heat Transfer Module for TSTCC: study of temperature profiles and heat transfer characteristics on an extended surface. It studies the effects of adding fins to a body to extend its surface to achieve a change in the...
View Unit
UNSTEADY STATE HEAT TRANSFER MODULE FOR TSTCC - TXC/EI
Available
9.6.- HEAT TRANSFER
TXC/EI
Unsteady State Heat Transfer Module for TSTCC
Accessory of TSTCC
TXC/EI. Unsteady State Heat Transfer Module for TSTCC: study of heat transfer in the non-stationary state Study of transient conduction with convection.Bench-top unit designed to allow practices and exercises to be performed in unsteady state heat...
View Unit
THREE AXES HEAT TRANSFER MODULE FOR TSTCC - TXC/TE
Available
9.6.- HEAT TRANSFER
TXC/TE
Three Axes Heat Transfer Module for TSTCC
Accessory of TSTCC
TXC/TE. Three Axes Heat Transfer Module for TSTCC: study of heat transfer by studying the direction in the three axes.Bench-top unit designed to carry out heat transfer experiments and exercises studying the direction in three axes.
View Unit
METAL TO METAL HEAT TRANSFER MODULE FOR TSTCC - TXC/MM
Available
9.6.- HEAT TRANSFER
TXC/MM
Metal to Metal Heat Transfer Module for TSTCC
Accessory of TSTCC
TXC/MM. Metal to Metal Heat Transfer Module for TSTCC: study of the heat transfer of different metallic materials placed in series.Bench-top unit designed to study of the heat transfer of different metallic materials situated in series.
View Unit
CERAMIC HEAT TRANSFER MODULE FOR TSTCC - TXC/TC
Available
9.6.- HEAT TRANSFER
TXC/TC
Ceramic Heat Transfer Module for TSTCC
Accessory of TSTCC
TXC/TC. Ceramic Heat Transfer Module for TSTCC: study of the heat transfer of different ceramic materials.Bench-top unit designed to study of the heat transfer of different ceramic materials.
View Unit
INSULATING MATERIAL HEAT TRANSFER MODULE FOR TSTCC - TXC/TI
Available
9.6.- HEAT TRANSFER
TXC/TI
Insulating Material Heat Transfer Module for TSTCC
Accessory of TSTCC
TXC/TI. Insulating Material Heat Transfer Module for TSTCC: study of the resistance to thermal conduction of different thermal insulation materials.Bench-top unit to study the thermal conduction resistance of different thermal insulating materials.
View Unit
HEAT TRANSFER SERIES - TSTCB
  • TSTCB
Available
9.6.- HEAT TRANSFER
TSTCB
Heat Transfer Series
The Heat Transfer Series, "TSTCB", has been designed by EDIBON to study and compare different types of heat transfer on a small scale.It allows a wide range of heat transfer demonstrations and study the factors affecting and problems associated...
View Unit
LINEAR HEAT CONDUCTION MODULE FOR TSTCB - TXC/CLB
Available
9.6.- HEAT TRANSFER
TXC/CLB
Linear Heat Conduction Module for TSTCB
Accessory of TSTCB
Bench-top unit to study the principles of linear heat conduction and to allow the conductivity of various solid conductors and insulators to be measured.It is given with interchangeable samples of different materials, different diameters and...
View Unit
RADIAL HEAT CONDUCTION MODULE FOR TSTCB - TXC/CRB
Available
9.6.- HEAT TRANSFER
TXC/CRB
Radial Heat Conduction Module for TSTCB
Accessory of TSTCB
Bench-top unit to study the principles of radial heat conduction, and to allow the conductivity of solid brass disk to be measured.Anodized aluminum frame and panels made of painted steel.Diagram in the front panel with distribution of the...
View Unit
RADIATION HEAT TRANSFER MODULE FOR TSTCB - TXC/RCB
Available
9.6.- HEAT TRANSFER
TXC/RCB
Radiation Heat Transfer Module for TSTCB
Accessory of TSTCB
The elements provided with the Radiation Heat Transfer Module for TSTCB, "TXC/RCB", allow measurements of temperature, radiation, light intensity and the power in the heating element or bulb.It basically consists of two independent parts. One of...
View Unit
EXTENDED SURFACE HEAT TRANSFER MODULE FOR TSTCB - TXC/SEB
Available
9.6.- HEAT TRANSFER
TXC/SEB
Extended Surface Heat Transfer Module for TSTCB
Accessory of TSTCB
The Extended Surface Heat Transfer Module for TSTCB, "TXC/SEB", has been designed to demonstrate the temperature profiles and heat transfer characteristics of an extended surface. It studies the effects of adding fins to a surface-extended body to...
View Unit
UNSTEADY STATE HEAT TRANSFER MODULE FOR TSTCB - TXC/EIB
Available
9.6.- HEAT TRANSFER
TXC/EIB
Unsteady State Heat Transfer Module for TSTCB
Accessory of TSTCB
The Unsteady State Heat Transfer Module for TSTCB, "TXC/EIB", bench-top unit has been designedto allow practices and exercises to be performed in unsteady state heat transfer. It studies transient conduction with convection. Using different shapes...
View Unit
THREE AXES HEAT TRANSFER MODULE FOR TSTCB - TXC/TEB
Available
9.6.- HEAT TRANSFER
TXC/TEB
Three Axes Heat Transfer Module for TSTCB
Accessory of TSTCB
The Three Axes Heat Transfer Module for TSTCB, "TXC/TEB", has been designed to carry out heat transfer experiments and exercises studying the direction in three axes.Anodized aluminum frame and panels made of painted steel.Diagram in the front...
View Unit
METAL TO METAL HEAT TRANSFER MODULE FOR TSTCB - TXC/MMB
Available
9.6.- HEAT TRANSFER
TXC/MMB
Metal to Metal Heat Transfer Module for TSTCB
Accessory of TSTCB
The Metal to Metal Heat Transfer Module for TSTCB, "TXC/MMB", bench-top unit has been designed to study of the heat transfer of different metallic materials situated in series.Anodized aluminum frame and panels made of painted steel.Diagram in the...
View Unit
CERAMIC HEAT TRANSFER MODULE FOR TSTCB - TXC/TCB
Available
9.6.- HEAT TRANSFER
TXC/TCB
Ceramic Heat Transfer Module for TSTCB
Accessory of TSTCB
The Ceramic Heat Transfer Module for TSTCB, "TXC/TCB", bench-top unit has been designed to study of the heat transfer of different ceramic materials.Anodized aluminum frame and panels made of painted steel.Diagram in the front panel with...
View Unit
INSULATING MATERIAL HEAT TRANSFER MODULE FOR TSTCB - TXC/TIB
Available
9.6.- HEAT TRANSFER
TXC/TIB
Insulating Material Heat Transfer Module for TSTCB
Accessory of TSTCB
The Insulating Material Heat Transfer Module for TSTCB, "TXC/TIB", bench-top unit has been designed to study the thermal conduction resistance of different thermal insulating materials.Anodized aluminum structure and panel of painted steel.Diagram...
View Unit
COMPUTER CONTROLLED HEAT CONDUCTION UNIT - TCCC
  • TCCC
Available
9.6.- HEAT TRANSFER
TCCC
Computer Controlled Heat Conduction Unit
The Computer Controlled Heat Conduction Unit, "TCCC", consists of two modules electrically heated.One of the modules is provided of a cylindrical metal bar for the realization of a series of experiments of linear heat conduction. While the ther...
View Unit
FREE AND FORCED CONVECTION HEAT TRANSFER EQUIPMENT - TCLFB
  • TCLFB
Available
9.6.- HEAT TRANSFER
TCLFB
Free and Forced Convection Heat Transfer Equipment
The Free and Forced Convection Heat Transfer Unit, "TCLFB", allows to study the efficiency ofdifferent exchangers, analyzing the heat transmission coefficients of each exchanger exposedto different airflows.Fan placed in the upper part of the...
View Unit
COMPUTER CONTROLLED FLOW BOILING DEMONSTRATION UNIT - TFEC
  • TFEC
Available
11.1.3.- BOILING
TFEC
Computer Controlled Flow Boiling Demonstration Unit
The Computer Controlled Flow Boiling Demonstration Unit, "TFEC", has as main component an experimental tube made of two glass concentric tubes. In these tubes two fluids flow crosscurrent: refrigerant, which flows by convection and in an...
View Unit
FLOW BOILING DEMONSTRATION UNIT - TFEB
  • TFEB
Available
11.1.3.- BOILING
TFEB
Flow Boiling Demonstration Unit
The Flow Boiling Demonstration Unit, "TFEB", has as main component an experimental tube made of two glass concentric tubes. In thesetubes two fluids flow crosscurrent: refrigerant, which flows by convection and in an ascendant way through the...
View Unit
FLUIDIZATION AND FLUID BED HEAT TRANSFER UNIT - TTLFB
  • TTLFB
Available
11.1.1.- FLUIDIZATION
TTLFB
Fluidization and Fluid Bed Heat Transfer Unit
The Fluidization and Fluid Bed Heat Transfer Unit, "TTLFB", has been designed to provide visual and quantitative results related to the flow of air through a packed bed and a fluidized bed made of granular material. It provides clear experimental...
View Unit
COMPUTER CONTROLLED LAMINAR/VISCOUS FLOW HEAT TRANSFER UNIT - TFLVC
  • TFLVC
Available
9.7.- HEAT EXCHANGERS
TFLVC
Computer Controlled Laminar/Viscous Flow Heat Transfer Unit
The Computer Controlled Laminar/Viscous Flow Heat Transfer Unit, "TFLVC", is a laboratory scale unit designed to study heat transfer between hot oil flowing in laminar flow through an internal tube and cold water that flows through the annulus...
View Unit
LAMINAR/VISCOUS FLOW HEAT TRANSFER UNIT - TFLVB
  • TFLVB
Available
9.7.- HEAT EXCHANGERS
TFLVB
Laminar/Viscous Flow Heat Transfer Unit
The Laminar/Viscous Flow Heat Transfer Unit, "TFLVB", is a laboratory scale unit designed to study heat transfer between hot oil flowing inlaminar flow through an internal tube and cold water that flows through the annulus (ring-shaped area).Oil...
View Unit
COMPUTER CONTROLLED BOILING HEAT TRANSFER UNIT - TCEC
  • TCEC
Available
11.1.3.- BOILING
TCEC
Computer Controlled Boiling Heat Transfer Unit
The Computer Controlled Boiling Heat Transfer Unit, "TCEC", consists of a heating element horizontally mounted inside a vertical glass chamber submerged in coolant. This heating element is connected to a cylindrical copper sleeve in contact with...
View Unit
BOILING HEAT TRANSFER UNIT - TCEB
  • TCEB
Available
11.1.3.- BOILING
TCEB
Boiling Heat Transfer Unit
The Boiling Heat Transfer Unit, "TCEB", consists of a heating element horizontally mounted inside a vertical glass chamber submerged in coolant. This heating element is connected to a cylindrical copper sleeve in contact with the coolant. Attached...
View Unit
COMPUTER CONTROLLED STEAM TO WATER HEAT EXCHANGER - TIVAC
  • TIVAC
Available
9.7.- HEAT EXCHANGERS
TIVAC
Computer Controlled Steam to Water Heat Exchanger
The Computer Controlled Steam to Water Heat Exchanger, "TIVAC", is a unit designed to study condensation phenomena in shell and tube heat exchangers. It mainly consists of a steam chamber, which is a vertical cylinder made of resistant glass. The...
View Unit
COMPUTER CONTROLLED FILM AND DROPWISE CONDENSATION UNIT - TCPGC
  • TCPGC
Available
9.7.- HEAT EXCHANGERS
TCPGC
Computer Controlled Film and Dropwise Condensation Unit
The Computer Controlled Film and Dropwise Condensation Unit, "TCPGC", has been specially designed for students use and to provide visual results and quantitative results related to heat transfer during condensation. Self-contained unit, which has...
View Unit
FILM AND DROPWISE CONDENSATION UNIT - TCPGB
  • TCPGB
Available
9.7.- HEAT EXCHANGERS
TCPGB
Film and Dropwise Condensation Unit
The Film and Dropwise Condensation Unit, "TCPGB", has been specially designed for students use and to provide visual results and quantitative results related to heat transfer during condensation.Self-contained unit, which has its own steam...
View Unit
COMPUTER CONTROLLED HEAT EXCHANGERS TRAINING SYSTEM - TICC
  • TICC
Available
9.7.- HEAT EXCHANGERS
TICC
Computer Controlled Heat Exchangers Training System
Heat exchangers are widely used in refrigeration, air conditioning, heating, energy generation, chemical processing, etc. They have many applications in engineering and, as a consequence, there are many models adapted to each application to obtain...
View Unit
CONCENTRIC TUBE HEAT EXCHANGER FOR TICC - TITC
Available
9.7.- HEAT EXCHANGERS
TITC
Concentric Tube Heat Exchanger for TICC
Accessory of TICC
Concentric Tube Heat Exchanger for TICC: It has been designed to study the heat transfer between hot water flowing through an internal tube and cold water flowing through the annular area between the internal and the external tubes.
View Unit
EXTENDED CONCENTRIC TUBE HEAT EXCHANGER FOR TICC - TITCA
Available
9.7.- HEAT EXCHANGERS
TITCA
Extended Concentric Tube Heat Exchanger for TICC
Accessory of TICC
Extended Concentric Tube Heat Exchanger for TICC: It has been designed to study the heat transfer between hot water flowing through an internal tube and cold water flowing through the annular area between the internal and the external tubes.
View Unit
PLATE HEAT EXCHANGER FOR TICC - TIPL
Available
9.7.- HEAT EXCHANGERS
TIPL
Plate Heat Exchanger for TICC
Accessory of TICC
Plate Heat Exchanger for TICC: It has been designed to study the heat transfer between hot water and cold water flowing through alternate channels formed between parallel plates.
View Unit
EXTENDED PLATE HEAT EXCHANGER FOR TICC - TIPLA
Available
9.7.- HEAT EXCHANGERS
TIPLA
Extended Plate Heat Exchanger for TICC
Accessory of TICC
Extended Plate Heat Exchanger for TICC: It has been designed to study the heat transfer between hot water and cold water flowing through alternate channels formed between parallel plates.
View Unit
SHELL & TUBE HEAT EXCHANGER FOR TICC - TICT
Available
9.7.- HEAT EXCHANGERS
TICT
Shell & Tube Heat Exchanger for TICC
Accessory of TICC
Shell and Tube Heat Exchanger for TICC: It consists of a series of tubes inside the heat exchanger where hot water flows. The cooling water flows through the space between the inner tubes and the shell.
View Unit
TURBULENT FLOW HEAT EXCHANGER FOR TICC - TIFT
Available
9.7.- HEAT EXCHANGERS
TIFT
Turbulent Flow Heat Exchanger for TICC
Accessory of TICC
Turbulent Flow Heat Exchanger for TICC: Let us study the heat transfer between hot water that circulates through an internal tube and cold water that flows through the annular zone between the internal and the external tube.
View Unit
CROSS FLOW HEAT EXCHANGER FOR TICC - TICF
Available
9.7.- HEAT EXCHANGERS
TICF
Cross Flow Heat Exchanger for TICC
Accessory of TICC
Cross Flow Heat Exchanger for TICC: Designed to study heat transfer between two fluids in cross flow configuration. Hot water flow coming from the base unit enters and leaves a radiator perpendicular to an air current, which is generated by a fan.
View Unit
HEAT EXCHANGER TRAINING SYSTEM - TICB
  • TICB
Available
9.7.- HEAT EXCHANGERS
TICB
Heat exchanger Training System
Heat exchangers are widely used in refrigeration, air conditioning, heating, energy generation, chemical processing, etc. They have many applications in engineering and, as a consequence, there are many models adapted to each application to obtain...
View Unit
CONCENTRIC TUBE HEAT EXCHANGER FOR TICB - TITCB
Available
9.7.- HEAT EXCHANGERS
TITCB
Concentric Tube Heat Exchanger for TICB
Accessory of TICB
It has been designed to study the heat transfer between hot water flowing through an internal tube and cold water flowing through the annular area between the internal and the external tubes.
View Unit
PLATE HEAT EXCHANGER FOR TICB - TIPLB
Available
9.7.- HEAT EXCHANGERS
TIPLB
Plate Heat Exchanger for TICB
Accessory of TICB
It has been designed to study the heat transfer between hot water and cold water flowing through alternate channels formed between parallel plates.
View Unit
SHELL & TUBE HEAT EXCHANGER FOR TICB - TICTB
Available
9.7.- HEAT EXCHANGERS
TICTB
Shell & Tube Heat Exchanger for TICB
Accessory of TICB
It consists of a series of tubes inside the heat exchanger where hot water flows. The cooling water flows through the space between the inner tubes and the shell.
View Unit
TURBULENT FLOW HEAT EXCHANGER FOR TICB - TIFTB
Available
9.7.- HEAT EXCHANGERS
TIFTB
Turbulent Flow Heat Exchanger for TICB
Accessory of TICB
Let us study the heat transfer between hot water that circulates through an internal tube and cold water that flows through the annular zone between the internal and the external tube.
View Unit
CROSS FLOW HEAT EXCHANGER FOR TICB - TICFB
Available
9.7.- HEAT EXCHANGERS
TICFB
Cross Flow Heat Exchanger for TICB
Accessory of TICB
Designed to study heat transfer between two fluids in cross flow configuration. Hot water flow coming from the base unit enters and leaves a radiator perpendicular to an air current, which is generated by a fan.
View Unit
COMPUTER CONTROLLED HEAT EXCHANGERS BASIC UNIT - TICC/SS
  • TICC/SS
Available
9.7.- HEAT EXCHANGERS
TICC/SS
Computer Controlled Heat Exchangers Basic Unit
The Computer Controlled Basic Heat Exchangers Unit (TICC/SS) has been designed by Edibon to study and compare different types of small-scale heat exchangers working with parallel or counterflow arrangements.The complete unit consists of two main...
View Unit
COMPUTER CONTROLLED CROSS FLOW HEAT EXCHANGER - TIFCC
  • TIFCC
Available
9.7.- HEAT EXCHANGERS
TIFCC
Computer Controlled Cross Flow Heat Exchanger
The Computer Controlled Cross Flow Heat Exchanger (TIFCC) basically consists of a rectangular wind tunnel made of stainless steel, resistant to corrosion. It has a bell-shaped inlet and a central opening arranged longitudinally with two supporting...
View Unit
CROSS FLOW HEAT EXCHANGER - TIFCB
  • TIFCB
Available
9.7.- HEAT EXCHANGERS
TIFCB
Cross Flow Heat Exchanger
The Cross Flow Heat Exchanger (TIFCB) basically consists of a rectangular wind tunnel made of stainless steel, resistant to corrosion. It has a bellshaped inlet and a central opening arranged longitudinally with two supporting elements made of...
View Unit
COMPUTER CONTROLLED WATER-TO-AIR HEAT EXCHANGER UNIT - TIAAC
  • TIAAC
Available
9.7.- HEAT EXCHANGERS
TIAAC
Computer Controlled Water-to-Air Heat Exchanger Unit
The Computer Controlled Water-to-Air Heat Exchanger Unit, "TIAAC", includes a stainless steel duct with a heat exchanger in its center and a centrifugal fan at one end. The fan impels the air through the heat exchanger. The heat exchanger...
View Unit
HEAT EXCHANGERS IN THE REFRIGERATION UNIT - THER
  • THER
Available
9.7.- HEAT EXCHANGERS
THER
Heat Exchangers in the Refrigeration Unit
The "THER" consists of a refrigeration circuit, with the most common heat exchangers in refrigeration circuits. All the elements are clearly mounted in the front panel of the unit. The evaporator is an air cooling finned tube heat exchanger and a...
View Unit
COMPUTER CONTROLLED TWO -SHAFT GAS TURBINE - TGDEC
  • TGDEC
Available
5.4.- CONVENTIONAL ENERGIES
TGDEC
Computer Controlled Two -Shaft Gas Turbine
The main element of the Computer Controlled Two-Shaft Gas Turbine "TGDEC" is the High Pressure Turbine, which is also called Gas Generative Turbine. It consists of:Radial compressor, which is feeded by atmospheric air to compress it.Tubular...
View Unit
COMPUTER CONTROLLED TWO-SHAFT GAS TURBINE/ JET ENGINE - TGDEPC
  • TGDEPC
Available
5.4.- CONVENTIONAL ENERGIES
TGDEPC
Computer Controlled Two-Shaft Gas Turbine/ Jet Engine
The main element of the Computer Controlled Two-Shaft Gas Turbine/ Jet Engine, "TGDEPC", is the High Pressure Turbine, which is also called Gas Generative Turbine. It consists of:Radial compressor, which is feeded by atmospheric air to compress...
View Unit
COMPUTER CONTROLLED AXIAL FLOW GAS TURBINE/ JET ENGINE - TGFAC
  • TGFAC
Available
9.9.- INTERNAL COMBUSTION ENGINES
TGFAC
Computer Controlled Axial Flow Gas Turbine/ Jet Engine
The main element of the "TGFAC" unit is the gas turbine, which consists of:Axial compressor, supplied by atmospheric air that will be compressed afterwards.Annular combustion chamber, where fuel is added to the compressed air and that mixture is...
View Unit
COMPUTER CONTROLLED SOLAR/HEAT SOURCE VAPOUR TURBINE - HTVC
  • HTVC
Available
5.3.10.- STEAM TURBINES AND ORGANIC RANKINE CYCLES
HTVC
Computer Controlled Solar/Heat Source Vapour Turbine
The Computer Controlled Solar/Heat Source Vapour Turbine, "HTVC", has been designed to provide an easily understood vapour power plant and to demonstrate, on a lab scale, the ability to produce shaft power from Solar Radiation.It is a bench-top...
View Unit
COMPUTER CONTROLLED STEAM MOTOR AND ENERGY CONVERSION UNIT - TSMEC
  • TSMEC
Available
9.8.- THERMAL MACHINES
TSMEC
Computer Controlled Steam Motor and Energy Conversion Unit
The process starts when water is impelled by a computer controlled pump from a storage tank to a computer controlled water boiler, where it is transformed into steam. The boiler is made up of heating elements, whose power is measured and...
View Unit
COMPUTER CONTROLLED STIRLING MOTOR - TMSC
  • TMSC
Available
5.3.11.- OTHER NON-CONVENTIONAL SYSTEMS
TMSC
Computer Controlled Stirling Motor
The Computer Controlled Stirling Motor, "TMSC", is used to demonstrate the operation of a thermodynamic machine for the conversion of energy. It converts thermal energy into mechanical energy and operates as a motor (heat engine). Additionally it...
View Unit
STIRLING MOTOR - TMSB
  • TMSB
Available
9.8.- THERMAL MACHINES
TMSB
Stirling Motor
The Stirling Motor, "TMSB", is used to demonstrate the operation of a thermodynamic machine for the conversion of energy. It converts thermal energy into mechanical energy and operates as a motor (heat engine). Additionally it can operate an...
View Unit
COMPUTER CONTROLLED AND TOUCH SCREEN 20 KW STEAM POWER PLANT - TPTV/20kW/CTS
  • TPTV/20kW/CTS
Available
5.3.10.- STEAM TURBINES AND ORGANIC RANKINE CYCLES
TPTV/20kW/CTS
Computer Controlled and Touch Screen 20 kW Steam Power Plant
The Computer Controlled and Touch Screen 20 kW Steam Power Plant,"TPTV/20kW/CTS", allows the detailed study of the power generation cycle using steam as process fluid.In addition to the main TPTV unit, the unit has three required units, Water...
View Unit
COMPUTER CONTROLLED AND TOUCH SCREEN 1.5 KW STEAM POWER PLANT - TPTV/1.5kW/CTS
  • TPTV/1.5kW/CTS
Available
5.3.10.- STEAM TURBINES AND ORGANIC RANKINE CYCLES
TPTV/1.5kW/CTS
Computer Controlled and Touch Screen 1.5 kW Steam Power Plant
The Computer Controlled and Touch Screen 1.5 kW Steam Power Plant,"TPTV/1.5kW/CTS", allows the detailed study of the power generation cycle using steam as process fluid.In addition to the main TPTV unit, the unit has three required units, Water...
View Unit
COMPUTER CONTROLLED TEST BENCH FOR 2.2 KW ENGINES - TBMC3
  • TBMC3
Available
7.2.3.- ENGINES
TBMC3
Computer Controlled Test Bench for 2.2 kW Engines
The Computer Controlled Test Bench for Single-Cylinder Engines, 2.2 kW, "TBMC3", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 2.2 kW.The unit has an element to exert the braking torque, an asynchronous motor...
View Unit
COMPUTER CONTROLLED TEST BENCH FOR 7.5 KW ENGINES - TBMC8
  • TBMC8
Available
7.2.3.- ENGINES
TBMC8
Computer Controlled Test Bench for 7.5 kW Engines
The Computer Controlled Test Bench for Single-Cylinder Engines, 7.5 kW, "TBMC8", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 7.5 kW.The element of the unit that offers load torque is an eddy current...
View Unit
COMPUTER CONTROLLED TEST BENCH FOR 11 KW ENGINES - TBMC12
  • TBMC12
Available
7.2.3.- ENGINES
TBMC12
Computer Controlled Test Bench for 11 kW Engines
The Computer Controlled Test Bench for Single-Cylinder and Two-Cylinders Engines, 11 kW, "TBMC12", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 11 kW.The element of the unit that offers load torque is an eddy...
View Unit
COMPUTER CONTROLLED TEST BENCH FOR 75 KW ENGINES - TBMC75
  • TBMC75
Available
7.2.3.- ENGINES
TBMC75
Computer Controlled Test Bench for 75 kW Engines
The Computer Controlled Test Bench for Four Cylinders Engines, 75 kW, "TBMC75", designed by EDIBON, is a teaching unit to test internal combustion engines of up to 75 kW.The element of the unit that offers load torque is an eddy current...
View Unit
COMPUTER CONTROLLED EXHAUST GAS CALORIMETER - TBMC-CG
  • TBMC-CG
Available
7.2.3.- ENGINES
TBMC-CG
Computer Controlled Exhaust Gas Calorimeter
The Computer Controlled Exhaust Gas Calorimeter, "TBMC-CG", is mounted on a laminated aluminium profiles frame and panels in painted steel.The main element consists on a double-wall tank made in stainless steel. Through the tank interior the...
View Unit
EXHAUST GAS ANALYZER - TBMC-AGE
  • TBMC-AGE
Available
7.2.3.- ENGINES
TBMC-AGE
Exhaust Gas Analyzer
Measurement of the volumetric concentrations according to the procedure of nondispersiva infrared absorption.Engines selection: gasoline, butane, propane, 2/4 times, 1/2/3/4/5/6/8/12 cylinders.Fast warm-up of the measure cell.Auto-check...
View Unit
PORTABLE FLUE GAS ANALYZER - PFGA
  • PFGA
Available
9.9.- INTERNAL COMBUSTION ENGINES
PFGA
Portable Flue Gas Analyzer
The PFGA unit is a flue gas analyzer stored in a portable case. It is used to check the existence of O2, CO, CO2 and nitrogen oxides in the flue gases from home heating systems with simultaneous measurement of the flue gases temperature and the...
View Unit
COMPUTER CONTROLLED TEST BENCH FOR HYBRID ENGINE - TMHC
  • TMHC
Available
7.2.3.- ENGINES
TMHC
Computer Controlled Test Bench for Hybrid Engine
The Computer Controlled Test Bench for Hybrid Engine, "TMHC", is a teaching unit that allows to study and analyze the power source of a hybrid vehicle, consisting on a combination of an electrical motor and an internal combustion engine.These two...
View Unit
UNIT TO STUDY A FILTER DRIER CUTAWAY MODEL - DFCM
  • DFCM
Available
9.10.1.- CUTAWAY MODELS
DFCM
Unit to Study a Filter Drier Cutaway Model
The Unit to Study a Filter Drier Cutaway Model, "DFCM", allows the students to visualize the inner parts of a (element), to evaluate the relation with each other accurately and to understand their functionThe cutaway model of a filter drier is...
View Unit
UNIT TO STUDY A GAS METER CUTAWAY MODEL - GMCM
  • GMCM
Available
9.10.1.- CUTAWAY MODELS
GMCM
Unit to Study a Gas Meter Cutaway Model
The Unit to Study a Gas Meter Cutaway Model, "GMCM", allows the students to visualize the inner parts of a gas meter, to evaluate the relation with each other accurately and to understand their function.It is a measurement device to determine the...
View Unit
UNIT TO STUDY A HELICAL OIL SEPARATOR CUTAWAY MODEL - HOSCM
  • HOSCM
Available
9.10.1.- CUTAWAY MODELS
HOSCM
Unit to Study a Helical Oil Separator Cutaway Model
The Unit to Study a Helical Oil Separator Cutaway Model, "HOSCM", allows the students to visualize the inner parts of a liquid separator, to evaluate the relation with each other accurately and to understand their function.It is a real model used...
View Unit
UNIT TO STUDY A LIQUID SEPARATOR CUTAWAY MODEL - LSCM
  • LSCM
Available
9.10.1.- CUTAWAY MODELS
LSCM
Unit to Study a Liquid Separator Cutaway Model
The Unit to Study a Liquid Separator Cutaway Model, "LSCM", allows the students to visualize the inner parts of a liquid separator, to evaluate the relation with each other accurately and to understand their function.The cutaway model of a liquid...
View Unit
UNIT TO STUDY AN OPEN REFRIGERANT COMPRESSOR CUTAWAY MODEL - OCCM
  • OCCM
Available
9.10.1.- CUTAWAY MODELS
OCCM
Unit to Study an Open Refrigerant Compressor Cutaway Model
The Unit to Study an Open Refrigerant Compressor Cutaway Model, "HCCM", allows the students to visualize the inner parts of an open compressor, to evaluate the relation with each other accurately and to understand their function.This unit allows...
View Unit
INTRODUCTION TO REFRIGERATION UNIT - TIR
  • TIR
Available
9.10.3.- INSTALLATIONS AND MAINTENANCE TRAINING
TIR
Introduction to Refrigeration Unit
The Introduction to Refrigeration Unit, "TIR", is a unit with exchangeable sets in which the components are mounted on plates and quickly connected by flexible hoses.The unit consists of a frame with a compressor, a refrigerant accumulator tank to...
View Unit
ASSEMBLY AND MAINTENANCE IN REFRIGERATION SYSTEMS UNIT - TAMR
  • TAMR
Available
9.10.3.- INSTALLATIONS AND MAINTENANCE TRAINING
TAMR
Assembly and Maintenance in Refrigeration Systems Unit
The Assembly and Maintenance in Refrigeration Systems Unit, "TAMR", has been designed to teach the students the planning, implementation and checking of processes related to the assembly, startup and maintenance of refrigeration systems.The fully...
View Unit
HOME REFRIGERATION MODEL - TRAMC/1
Available
9.10.3.- INSTALLATIONS AND MAINTENANCE TRAINING
TRAMC/1
Home refrigeration model
Accessory of TRAMC
The minimum supply consists of two main elements: the TRAMC Unit Base, "TRAMC-UB", and at least one of the required elements described below.The models are interconnected by special refrigerant hoses.The main components of the TRAMC Unit Base,...
View Unit
SIMPLE AIR CONDITIONING SYSTEM MODEL FOR ROOM COOLING - TRAMC/3
Available
9.10.3.- INSTALLATIONS AND MAINTENANCE TRAINING
TRAMC/3
Simple Air Conditioning System Model for Room Cooling
Accessory of TRAMC
The minimum supply consists of two main elements: the TRAMC Unit Base, "TRAMC-UB", and at least one of the required elements described below. The models are interconnected by special refrigerant hoses.The main components of the TRAMC Unit Base,...
View Unit
COMPLETE AIR CONDITIONING SYSTEM MODEL - TRAMC/4
Available
9.10.3.- INSTALLATIONS AND MAINTENANCE TRAINING
TRAMC/4
Complete Air Conditioning System Model
Accessory of TRAMC
The minimum supply consists of two main elements: the TRAMC Unit Base, "TRAMC-UB", and at least one of the required elements described below.The models are interconnected by special refrigerant hoses.The main components of the TRAMC Unit Base,...
View Unit
MEASUREMENT AND REGULATION STATION UNIT - MRST
  • MRST
Available
9.10.3.- INSTALLATIONS AND MAINTENANCE TRAINING
MRST
Measurement and Regulation Station Unit
The Measurement and Regulation Station Trainer,"MRST", designed by EDIBON is a totally accessible bench-top unit. The unit works with an air compressor that simulates the gas flowing inside the pipes (air testing), allowing to check the tightness...
View Unit
INSTANTANEOUS GAS HEATER EXPERIMENTATION UNIT - IGHT
  • IGHT
Available
9.10.3.- INSTALLATIONS AND MAINTENANCE TRAINING
IGHT
Instantaneous Gas Heater Experimentation Unit
The Instantaneous Gas Heater Trainer, ,IGHT,, designed by EDIBON, is a training unit with wheels to facilitate its mobility that represents a gas heater training system. The unit operates with air, simulating the operation of the heater, so it can...
View Unit
FORCED DRAFT GAS BURNER UNIT - GBT
  • GBT
Available
9.10.3.- INSTALLATIONS AND MAINTENANCE TRAINING
GBT
Forced Draft Gas Burner Unit
The Forced Air Gas Burner Trainer, "GBT", designed by EDIBON, is a compact teaching unit with wheels to facilitate its mobility. It represents a controlled gas system that supplies a forced air gas burner. It allows the study of the arrangement,...
View Unit
GAS HOME SUPPLY TRAINER - GHST
  • GHST
Available
9.10.3.- INSTALLATIONS AND MAINTENANCE TRAINING
GHST
Gas Home Supply Trainer
The Gas Home Supply Trainer, ,GHST,, designed by EDIBON, consists of a teaching unit where the elements normally used on any domestic gas installation are arranged on the front panel of the unit as in a real installation. The unit works with air,...
View Unit
ELECTRICAL INSTALLATIONS IN REFRIGERATION SYSTEMS UNIT - TEIR
  • TEIR
Available
9.10.3.- INSTALLATIONS AND MAINTENANCE TRAINING
TEIR
Electrical Installations in Refrigeration Systems Unit
For this purpose this unit has been designed to teach the students about different circuits and electrical devices associated with the refrigeration field, how to carry out the wirings of these types of installations, how the refrigeration...
View Unit
ELECTRICAL CONNECTION OF REFRIGERANT COMPRESSORS UNIT - TECR
  • TECR
Available
9.10.3.- INSTALLATIONS AND MAINTENANCE TRAINING
TECR
Electrical Connection of Refrigerant Compressors Unit
The Electrical Connection of Refrigerant Compressors Unit, "TECR", includes the electrical elements required for the start and operation of a refrigerant compressor and the necessary safety elements, arranged on a panel in a clear and visible way,...
View Unit
ELECTRICAL FAULTS IN AIR CONDITIONING SYSTEMS UNIT - TEFA
  • TEFA
Available
9.10.3.- INSTALLATIONS AND MAINTENANCE TRAINING
TEFA
Electrical Faults in Air Conditioning Systems Unit
The Electrical Faults in Air Conditioning Systems Unit,"TEFA", is designed in a simple way in order to transmit comprehensible knowledge about how identify electrical faults in air conditioning systems. For this purpose, concepts are included to...
View Unit
THREE-WAY MIXING VALVE TRAINING UNIT - TEV3V
  • TEV3V
Available
9.10.3.- INSTALLATIONS AND MAINTENANCE TRAINING
TEV3V
Three-Way Mixing Valve Training Unit
The Three-Way Mixing Valve Training Unit, "TEV3V", allows to demonstrate the function of a three-way mixing valve in a hot water heating system. The three-way mixing valve in the heating system regulates the supply water temperature to a heating...
View Unit
FOUR-WAY MIXING VALVE TRAINING UNIT - TEV4V
  • TEV4V
Available
9.10.3.- INSTALLATIONS AND MAINTENANCE TRAINING
TEV4V
Four-Way Mixing Valve Training Unit
The Four-Way Mixing Valve Training Unit, "TEV4V", allows to demonstrate the function of a four-way mixing valve in a hot water heating system. The four-way mixing valve in the heating system regulates the circulation and feed flow temperatures of...
View Unit
Pentagram

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Quick Links

Contact Us